Install Ingenico Credit Card Device
- Jason Reel (Deactivated)
Adding a new Ingenico device to a kiosk is not a difficult task. See the steps below to easily add one of these credit card devices to your kiosk.
Step-by-step guide
installing an Ingenico on an existing kiosk is very simple:
Plug in the device's network cable and power (not the USB cable yet), and allow it to boot to the Salvation Army logo.
Open Windows Device Manager and expand the ports section.
Plug in the USB cable and allow Windows to automatically install the driver while watching the Device Manager ports to see what new COM port number appears.
Go into the Kiosk configuration screen and set the credit card terminal port to that new COM port.
Restart the kiosk.
It's a really simple process in terms of physically connecting the device. If there are any issues please contact support.
Drivers do not need to be manually installed for the Ingenico device.