...
| Style | ||
|---|---|---|
| ||
| Div | ||
|---|---|---|
| ||
The kiosk settings Kiosk configuration screen allows users to define settings for peripherals and other items for the kiosk software. When using a Stealth computer with a built-in receipt printer, users will have to configure the correct cash drawer and paper cut commands for your specific printer model.
Step-by-step guide
Although printers can differ between Stealth models ,most of the ones recently are models that work with the following commands:
Cash Drawer: 27,112,48,40,40
Paper Cut: 27,105
These would be configured in the Kiosk Configuration screen shown below. The numeric values should be separated by commas, but no spaces. Those cash drawer and paper cut options should only be configured on Stealth computers, and should be turned off on all non-Stealth test machines such as laptops and tablets.
...
set up the different devices and printers they have attached to the machine. This can be accessed by clicking the Menu button in the top right corner of the Kiosk, then “Configure Kiosk” in the menu options.
...
Devices
There are a few devices listed on the left side of the configuration screen:
Credit Card Device
Barcode Scanner
Display Pole
For all Devices listed here, users can use the toggle switch to turn them on or off.
...
Once they are turned on, the user can select which Serial Port the device is connected to.
...
The currently selected Serial Port will always show at the top of the list.
...
Printers
Printers are listed on the right side of the configuration screen:
Receipt Printer
Remote Printer
Card Printer
The user can use the toggle switches to select which printers they are using.
...
Once a printer has been selected, the user can chose which printer they want those receipts sent to.
...
Each printer has it’s own options that can be turned on or off with a check box. The user can also set the Key Command for each option.
...
Saving
The save button will only be enabled when changes have been made to the configuration screen. When clicked, a dialog will be shown, informing the user that they will need to restart the Kiosk for the changes to take effect.
...
Note: Clicking “Okay” here will not Exit the Kiosk automatically. The user can manually exit the Kiosk and restart it to see the new changes in effect, or they can continue using the Kiosk with the previous configuration.
...
Related articles
| Filter by label (Content by label) | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
...